Spectralink h340 User Manual download pdf (Page 13)

SpectraLink Corporation Configuration and Administration—NetLink e340/h340/i640 Wireless Telephone

with SIP

PN: 72-1089-02-D.doc Page 13

information pertaining to the handset, registers with the proxy server(s), and verifies

handset credentials. Once this process is complete, the handset is ready to use.

If the username and password have not been defined in the Admin menu, you will

be prompted to enter both of these items before the extension number can display.

The user name must correspond to the configuration file that contains user-specific

information. If the file is not found, an error message will appear and the handset

will restart. See Section 6.1

SIP TFTP Server Configuration Files

2.9 Handset Modes

Standby mode (on-hook)

In standby mode, the handset is waiting for an incoming call or for the user to place

an outgoing call. The extension number is shown on the display and there is no dial

tone. In this mode, the handset is conserving battery power and wireless LAN

bandwidth.

When an incoming call occurs, the handset will ring, and the handset enters the

active mode until the call is answered by pressing the Start Call key or the Answ

softkey. The handset will ring according to user preference as specified in the

standby menus. The ringing can be silenced by pressing the End Call key. If you do

not wish to accept the call, press the Rej softkey. The SIP server (if present) will

redirect the call as configured by the system administrator, often to voicemail.

(Treated like the handset is busy.)

Active mode (off-hook)

The handset is in the active mode when an incoming call is answered or when it is in

communication with the SIP server without being in an active call.

When an incoming call occurs during an active call, the handset will play the second

call ringing sound until the call is answered, the caller hangs up, or the call transfers

to voicemail. If End Call is pressed, the first call is terminated and the handset reverts

to a full ring.

The active modes utilize the most bandwidth and battery power. To conserve these

resources, return the handset to the standby mode when a call is completed by

pressing the End Call key.

Push-to-talk (PTT) mode

The NetLink i640 Wireless Telephones utilize channels for incoming and outgoing

radio communication. While PTT is active, the handset is in PTT mode. It can

receive regular phone calls in this mode. When a regular phone call is answered, the

handset enters active mode.

Messaging mode

If text messaging functions have been programmed, as in a nurse call system, the

handset is able to receive text messages. While these messages are being accessed, the

handset is in messaging mode. Incoming calls will ring with the second call ringing

sound.

1 2 ... 8 9 10 11 12 13 14 15 16 17 18 ... 60 61

Comments to this Manuals

No comments

Spectralink h340 User Manual Page 13

Comments to this Manuals

Related products and manuals for Handset Cordless Phone Spectralink h340

Relacionado con productos y manuales para Televisores Lcd Vizio M160MV