Spectralink h340 User Manual download pdf (Page 15)

SpectraLink Corporation Configuration and Administration—NetLink e340/h340/i640 Wireless Telephone

with SIP

PN: 72-1089-02-D.doc Page 15

3. NetLink Wireless Telephone Configuration

Each handset may be configured for site-specific requirements by opening the

Admin menu and selecting options or entering specific information. Any settings

entered in the Admin menu must conform to system settings. Only the handset

being configured is affected by the Admin menu settings.

The Wireless Telephone user may select several usability options from the Standby

menu, described below in the

User-defined Preferences

section. This information is also

provided in the end-user manual.

The NetLink Configuration Cradle is an accessory device designed to automate

configuration of e340/h340/i640 NetLink Wireless Telephones. The Configuration

Cradle is connected to a PC via a serial cable. A downloadable Configuration Cradle

program runs on the PC and enables the system administrator to establish and store

configuration options for system, group and user levels. A configuration plan may be

set up in the program and downloaded into a handset or a configured handset may

be placed in the cradle and its configuration may be uploaded and edited or saved.

Please see your service representative or contact SpectraLink Customer Service for

more information about this time-saving device

3.1 The Admin Menu

The Admin menu contains configuration options that are stored locally (on each

handset). Each handset is independent, and if the default settings are not desired, the

Admin options must be set in each handset requiring different settings.

Opening the Admin menu

1. With the handset powered off, press and hold the Power Off key. While holding

the Power Off key, press and release the Power On key.

2. . The first option on the Admin menu displays.



If an admin password has been set, the display will require its entry before

opening the Admin menu. The default password is 123456. If no password

is set, the display will proceed directly into the Admin menu.

To configure FIPS-capable handsets to comply with Federal Information Processing Standards (FIPS)

security, please see the FIPS Appendix.

1 2 ... 10 11 12 13 14 15 16 17 18 19 20 ... 60 61

No comments

Spectralink h340 User Manual Page 15