Spectralink h340 User Manual download pdf (Page 18)

SpectraLink Corporation Configuration and Administration—NetLink e340/h340/i640 Wireless Telephone

with SIP

PN: 72-1089-02-D.doc Page 18

Admin Menu Items 2

Level 3

Level 4

Level 5

Level

5 mW

Diagnostics Run Site Survey

Diagnostics Mode Diagnostics On

*Diagnostics Off

Syslog Mode *Disabled

Errors

Events

Full

Restore Defaults

* default setting

†50 mW and 30 mW only appear if Regulatory Domain is set to None or 01.

Phone Config

License Option

License Option lets you select the VoIP protocol that your site is licensed to

download and run. The SIP protocol used for the NetLink e340/h340/i640 Wireless

Telephones requires license option selection 11. Any other protocol will cause the

handset to malfunction.

SIP Registration

Individual handsets may be configured to correspond with the SIP configuration

information in the TFTP server. The handset is then automatically identified at

startup. If username and password information is not configured in the Admin

menu, then this information will be requested at startup

In either case, the username and password must agree with a corresponding

configuration file. See Section 6.1

SIP TFTP Server Configuration Files

Reg 1 and Login allows you to specify a username and password for automatically

acquiring SIP configuration information. If no username is specified, the SIP handset

will request username and password at startup and any additional registrations

specified here are ignored.

The username should correspond to the primary (line 1) dial number assigned to the

user. The username and password should also correspond to the authentication

credentials as created by your system administrator for your primary line registration.

Usernames or passwords can be erased by selecting the item, then pressing

Bksp

softkey and then Save softkey.

Reg 2, Reg 3, and Reg 4 allow you to specify additional authentication usernames

and passwords that may be required by your handset for any additional line

appearances (registrations) that may appear in the specific user’s configuration file.

This information will be ignored if a Reg 1 and Login username is not provided.

OAI On/Off

SpectraLink’s Open Application Interface (OAI) enables third-party computer

applications to display alphanumeric messages on the handset display and take input

from the handset keypad. Refer to the OAI Specification (Version 2.0)

documentation for information about administering the OAI Gateway and the

services it can provide.

If you have an OAI Gateway installed in your system, OAI may be optionally

enabled in each handset. You may select whether the handset should attempt to

1 2 ... 13 14 15 16 17 18 19 20 21 22 23 ... 60 61

Comments to this Manuals

No comments

Spectralink h340 User Manual Page 18

Comments to this Manuals

Related products and manuals for Handset Cordless Phone Spectralink h340